PF-SLV
Wall sleeve with puddle flange
A wall sleeve with puddle flange is a short pipe, the same length as the wall thickness, with a puddle plate welded at mid length. It is cast into the wall and the service pipe is passed through afterwards, with the gap closed by a modular link seal or sealant. It allows pipes to be installed, aligned and replaced after the concrete work is finished.

Specification
| Sleeve | One to two pipe sizes larger than the service pipe |
|---|---|
| Length | Equal to the wall thickness, flush both faces |
| Puddle plate | Welded all round at mid length |
| Materials | Hot-dip galvanized, stainless steel 304L or 316L, epoxy coated |
| Seal | Modular link seal or sealant by others, or supplied on request |
| Size range | DN50 to DN1200 (2" to 48") |
| Documents | Mill certificates to EN 10204 3.1, inspection report and approval drawing on request |
Where it is used
- Service entries where pipes are installed later
- Cable and duct entries
- Pipes that need movement or future replacement
- Large diameter penetrations
Sizes and dimensions
| Size | Inch | Pipe OD (mm) | Plate Ø (mm) | Plate thk (mm) | Weight, 300 mm wall (kg) |
|---|---|---|---|---|---|
| DN50 | 2" | 60.3 | 210 | 6 | 3.1 |
| DN65 | 2½" | 73.0 | 223 | 6 | 4.2 |
| DN80 | 3" | 88.9 | 239 | 6 | 5.2 |
| DN100 | 4" | 114.3 | 264 | 6 | 6.9 |
| DN125 | 5" | 141.3 | 291 | 6 | 8.9 |
| DN150 | 6" | 168.3 | 318 | 6 | 11.2 |
| DN200 | 8" | 219.1 | 419 | 8 | 19.1 |
| DN250 | 10" | 273.0 | 473 | 8 | 25.4 |
| DN300 | 12" | 323.9 | 524 | 8 | 30.5 |
| DN350 | 14" | 355.6 | 556 | 10 | 35.7 |
| DN400 | 16" | 406.4 | 606 | 10 | 40.4 |
| DN450 | 18" | 457.0 | 657 | 10 | 45.3 |
| DN500 | 20" | 508.0 | 708 | 10 | 50.1 |
| DN600 | 24" | 610.0 | 810 | 10 | 59.8 |
| DN700 | 28" | 711.0 | 1011 | 12 | 87.7 |
| DN800 | 32" | 813.0 | 1113 | 12 | 99.4 |
| DN900 | 36" | 914.0 | 1214 | 12 | 111.0 |
| DN1000 | 40" | 1016.0 | 1316 | 12 | 122.7 |
| DN1200 | 48" | 1219.0 | 1519 | 12 | 146.0 |
Standard manufacturing dimensions. Weights are for plain-end puddle pipes and exclude end flanges. Final dimensions are confirmed on the approval drawing issued with your order.
Questions about this product
What size sleeve do I need?
As a guide the sleeve is one or two nominal sizes larger than the service pipe so the seal fits. Send the pipe size and seal type and we will confirm.
Puddle flange or wall sleeve?
Use a puddle pipe when the pipe can be cast in permanently. Use a sleeve when the pipe is installed later or may need to move.
Related products
PF-HDGGI (hot-dip galvanized) puddle flange
Carbon steel puddle pipe galvanized after welding. The standard choice for basements, pump rooms and fire water tanks.
PF-MSMS (mild steel) puddle flange
Black or primed mild steel puddle pipe for dry services and for site painting.
PF-SS304Stainless steel 304L puddle flange
SS 304L puddle flange for clean water, process plants and indoor wet areas.
Get a quotation
Send your sizes. We reply with a price and a drawing.
Send a photo of your BOQ or drawing on WhatsApp, or build your items in the product selector.

- Telephone
- +974 4472 6271
- Qatar office
- Building 3, Street 400, Zone 56, Office 5, Salwa Road, Doha, Qatar
- Company
- A division of Aamtron Group
Aamtron Group General Contracting W.L.L.