Catalogue

Catalogue and data sheets

The full range, a data sheet for each product and the size chart in one document.

Request the catalogue and data sheets (PDF)

Tell us who you are. We check each request and send the documents to your company email or WhatsApp.

All fields are required.

Size chart

SizeInchPipe OD (mm)Pipe wall (mm)Plate Ø (mm)Plate thk (mm)Weight, 300 mm wall (kg)
DN251"33.43.3818362.7
DN321¼"42.23.5619263.3
DN401½"48.33.6819863.8
DN502"60.33.9121064.8
DN652½"73.05.1622366.8
DN803"88.95.4923968.6
DN1004"114.36.02264611.7
DN1255"141.36.55291615.5
DN1506"168.37.11318619.7
DN2008"219.18.18419831.8
DN25010"273.09.27473843.5
DN30012"323.99.53524852.7
DN35014"355.69.535561060.1
DN40016"406.49.536061068.4
DN45018"457.09.536571076.8
DN50020"508.09.537081085.3
DN60024"610.09.5381010102.2
DN70028"711.09.53101112137.1
DN80032"813.09.53111312156.0
DN90036"914.09.53121412174.8
DN100040"1016.09.53131612193.7
DN120048"1219.09.53151912231.3

Standard manufacturing dimensions. Weights are for plain-end puddle pipes and exclude end flanges. Final dimensions are confirmed on the approval drawing issued with your order.

GI (hot-dip galvanized) puddle flange PF-HDG

Carbon steel puddle pipe galvanized after welding. The standard choice for basements, pump rooms and fire water tanks.

PipeCarbon steel, ASTM A53 Gr. B, ASTM A106 Gr. B or API 5L Gr. B
Puddle plateCarbon steel, ASTM A36 or EN 10025 S275
WeldingContinuous fillet weld both sides of the plate
FinishHot-dip galvanized after fabrication to ISO 1461 or ASTM A123
EndsPlain, bevelled, grooved, threaded or flanged

MS (mild steel) puddle flange PF-MS

Black or primed mild steel puddle pipe for dry services and for site painting.

PipeMild steel, ASTM A53 Gr. B or equivalent
Puddle plateMild steel, ASTM A36 or EN 10025 S275
WeldingContinuous fillet weld both sides of the plate
FinishBlack, or one coat of shop primer
EndsPlain, bevelled, grooved, threaded or flanged

Stainless steel 304L puddle flange PF-SS304

SS 304L puddle flange for clean water, process plants and indoor wet areas.

PipeStainless steel ASTM A312 TP304L
Puddle plateStainless steel ASTM A240 304L
WeldingTIG, continuous both sides, low carbon filler
FinishWelds pickled and passivated
EndsPlain, bevelled, grooved or flanged

Stainless steel 316L puddle flange PF-SS316

SS 316L puddle flange for drinking water, sewage, pools, RO plants and coastal sites.

PipeStainless steel ASTM A312 TP316L
Puddle plateStainless steel ASTM A240 316L
WeldingTIG, continuous both sides, 316L filler
FinishWelds pickled and passivated
EndsPlain, bevelled, grooved or flanged

Epoxy coated puddle flange PF-EPX

Carbon steel puddle pipe with factory-applied epoxy for potable and fire water tanks.

PipeCarbon steel, ASTM A53 Gr. B or API 5L Gr. B
Puddle plateCarbon steel, ASTM A36 or EN 10025 S275
WeldingContinuous fillet weld both sides of the plate
FinishBlast cleaned, epoxy coated; coating system and thickness to project specification
EndsPlain, bevelled or flanged

Flanged puddle pipe PF-FLG

Puddle pipe with one or both ends flanged, drilled to EN 1092-1, ASME B16.5, BS 10 or AWWA C207.

ConfigurationsFlange × plain end, flange × flange, flange × spigot
Flange drillingEN 1092-1 PN10 or PN16, ASME B16.5 Class 150, BS 10 Table D or E, AWWA C207
MaterialsHot-dip galvanized, stainless steel 304L or 316L, epoxy coated
WeldingContinuous fillet weld both sides of plate and flanges
LengthWall thickness plus the projection you need each side

Split bolt-on puddle flange PF-SPL

Two-piece plate that clamps around a pipe already in place, for retrofit and site corrections.

PlateTwo halves, carbon steel galvanized or stainless steel 316L
SealEPDM rubber gasket between plate and pipe
FixingStainless steel bolts and nuts
To suitSteel, ductile iron, HDPE, uPVC and GRP pipe; state the pipe outside diameter
SizesDN50 to DN300 standard, larger to order

Wall sleeve with puddle flange PF-SLV

Cast-in sleeve with a puddle plate. The service pipe passes through later and is sealed with a link seal.

SleeveOne to two pipe sizes larger than the service pipe
LengthEqual to the wall thickness, flush both faces
Puddle plateWelded all round at mid length
MaterialsHot-dip galvanized, stainless steel 304L or 316L, epoxy coated
SealModular link seal or sealant by others, or supplied on request

Get a quotation

Send your sizes. We reply with a price and a drawing.

Send a photo of your BOQ or drawing on WhatsApp, or build your items in the product selector.

Qatar office
Building 3, Street 400, Zone 56, Office 5, Salwa Road, Doha, Qatar
Company
A division of Aamtron Group
Aamtron Group General Contracting W.L.L.
WhatsApp